LPL01 IP66
Module for monitoring and dimming a single lamp with power line
Equipment installed near the lamp for remote measurement, remote diagnosis and remote control of the light point through waves conveyed by LED lamps. The LPL01-IP66 module allows remote adjustment, switching on and off of the single light point where it is installed, in a version with IP66 protection rating.
Very similar to the LPL01-IP66 module, it also allows remote diagnosis and reading of measurements by the control centre and has an output that can be either a digital addressable lighting interface or 1÷10 Vdc.
The module is designed to be installed outside the luminaire, in the pole slot and outside it, if there is no space in the luminaire or if you want to separate the power supply of the luminaire from that of the remote management module.
It is important to remember that the LPL01-IP66 must be connected to the luminaire with a 4-conductor cable, two for power supply and two for control, and that the length of the control cable must not exceed 10 metres.
All models have the LPL/V function, i.e. they can be programmed to control the control outputs in order to follow, in terms of luminous flux emitted and power absorbed, the variations in the supply voltage (therefore, limited to the dimming function, communication via conveyed waves is not necessary as LPL/V receives the supply voltage value as a command and does not require an LPM module). The most classic application is where traditional SAP-type lamps and LED luminaires need to coexist, if there is a need to vary the luminous flux and power, with a centralised voltage regulator.
The LPL01-IP66 module is suitable for luminaires up to 165W.